Bizerba GSP H Instruction Manual Download Page 7

Page: 7 / 92

Instruction manual GSP

About these instructions

38107010002 en-US

7 / 92

Information

This information is intended for better understanding.

1.4

Warnings

Warnings are divided into danger levels by the signal word above the warning symbol.

Structure of warnings and meaning of signal words are described in these instructions as fol-
lows.

DANGER

Source of danger with high risk of imminent danger to persons!

The consequences are:

life threatening injuries,

serious health damage

– Measurements for prevention of danger are specified.

WARNING

Source of danger with medium risk of possible danger to persons!

The consequences can be:

serious injuries,

damage to health,

serious damage to property

– Measurements for prevention of danger are specified.

CAUTION

Source of danger with low risk of possible danger to persons!

The consequences can be:

injuries,

damage to property.

– Measurements for prevention of danger are specified.

NOTICE

Source of danger, improper use!

Damage to property can result.

– Measurements for prevention of danger are specified.

Summary of Contents for GSP H





























































































Search results

Summary of Contents for GSP H

Reviews:

Related manuals for GSP H

Brands by name

Popular brands

Bizerba GSP H, Instruction Manual

Search results

Summary of Contents for GSP H

Reviews:

Related manuals for GSP H

Brands by name

Popular brands