BIXOLON SRP-350 PlusA, User Manual

Page: 17 / 104

30
English
ESC FF
[Name]
[Format]
[Description] Print data in page mode.
ASCII ESC FF
Hex 1B 0C
Decimal 27 12
In page mode, prints all buffered data in the printing area collectively.
ESC SP n
[Name]
[Format]
[Range]
[Description] Set right-side character spacing.
ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
0
≤
n
≤
255
Sets the character spacing for the right side of the character to [n
×
horizontal or vertical motion units].
ESC ! n
[Name]
[Format]
[Range]
[Description] Select print modes.
ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
0
≤
n
≤
255
Selects print mode(s) using n as follows.
Bit Off/On Hex Decimal Function
Off 00 0 Character font(12 ×
24) selected.
0
On 01 1 Character font(9
×
17) selected.
1,2 - - - Undefined.
Off 00 0 Emphasized mode not selected. 3
On 08 8 Emphasized mode selected.
Off 00 0 Double-height mode not selected. 4
On 10 16 Double-height mode selected.
Off 00 0 Double-width mode not selected. 5
On 20 32 Double-width mode selected.
6 - - - Undefined.
Off 00 0 Underline mode not selected. 7
On 80 128 Underline mode selected.
31
English
ESC $ nL nH
[Name]
[Format]
[Range]
[Description] Set absolute print position.
ASCII ESC $ nL n
Hex 1B 24 nL n
Decimal 27 36 nL n
0
≤
n
≤
255
0
≤
n
≤
255
Set the distance from the beginning of the line to the position at which
subsequent characters are to be printed.
* The distance from the beginning of the line to the print position is
[(nL + nH
×
256)
×
(vertical or horizontal notion unit)] inches.
ESC % n
[Name]
[Format]
[Range]
[Description] Select / Cancel user-defined character set.
ASCII ESC % n
Hex 1B 25 n
Decimal 27 37 n
0
≤
n
≤
255
Selects or cancels the user-defined character set.
When the LSB is 0, the user-defined character set is canceled.
When the LSB is 1, the user-defined character set is selected.
ESC & y c1 c2 [x1 d1…d(y X x1)]… [xk d1… d(yx X xk)]
[Name]
[Format]
[Range]
[Description] Define user-defined characters.
ASCII ESC & n y c1 c2[x1 d1…d(y X x1)]… [xk d1… d(yx X xk)]
Hex 1B 26 n y c1 c2[x1 d1…d(y X x1)]… [xk d1… d(yx X xk)]
Decimal 27 38 n y c1 c2[x1 d1…d(y X x1)]… [xk d1… d(yx X xk)]
y = 3, 32
≤
c1
≤
c2
≤
126
0
≤
x
≤
12 (12x24 font)
0
≤
x
≤
9 (9x17 font)
0
≤
d1 … d(y X xk)
≤
255
- y specifies the number of bytes in the vertical direction.
- c1 specifies the beginning character code for the definition,
and c2 specifies the final code.
- x specifies the number of dots in the horizontal direction.