Rev. 1.00
- 17 -
SRP-Q300/302
1-10 Using Printer Functions
Caution
- If the printer does not power on, check that the adapter LED
indicates “ON”
- For SRP-Q300H/Q302H products, press the power button and
then wait until the error display and paper display lamps stop
flickering.
• Error (Indicator Lamp)
Red light will be on in various error conditions such as out of paper, cover open, etc.
• Paper (Indicator Lamp)
Red light will be on when there is no paper or paper almost runs out. If this light keeps
blinking, it means that the printer is in self-test standby state or waiting for macro
execution.
• Feed (Button)
Press this button to feed the paper out. Hold down this button to feed out the paper
continuously.
• Power (Button)
- Power On
Hold the Power button until the power Lamp indicator comes on.
- Power Off
Hold the Power button for 3 seconds. The printer will beep and the
Error and Paper indicators will turn on. When you take your finger off
