Rev. 1.00
- 13 -
SRP-Q300/302
Caution
- Only use a power supply provided by Bixolon. Bixolon shall
bear noresponsibility for damage caused by using a third-party
power supply.
- Check the power supply’s label to check its electronic specs.
- When removing the power supply, make sure you have a firm
grasp of the plug terminal of the power cable and the printer
and pull horizontally.
- When using the printer and B-gate together, connect the power
only to B-gate.
Supplying power to the printer may result in product malfunction.
- When connecting or disconnecting power, make sure to remove
the power supply from the power outlet before removing.
- If the voltage of the power supply and the power outlet is not
correct, contact the seller and do not connect the power supply.
Failure to do so may result in damage to the product.
- Pay attention to the direction in which you insert the power
cable.
1-6 Reconfiguration of Printer
•
This product does not support Dip Switch. In order to change the product’s configuration,
use either the virtual memory switch utility or the virtual memory switch management
function when performing a self-diagnosis.
• Please refer to the Utility and Service Manual for more information.
Caution
- Make sure to turn the printer off and on again after using
the virtual memory switch utility to adjust the settings of the
product.
