BITREK BI-530C TREK Operating Manual Download

Page: 6 / 59

www.bitrek.eu
[email protected]
+372 880 78 78

Supply package

The tracking device “BI-530C TREK” is provided with the following set:

Tracking device “BI-530C TREK” – 1 piece.

Connection cable – 1 piece.

Technical data sheet – 1 piece.

Warranty card – 1 piece.

Package box – 1 piece.

Preparation for operation, commissioning

SIM-card installation

To operate in GSM network device shall contain installed SIM-card

of Micro-SIM format. Phone book of SIM-card shall remain empty, PIN-
code shall be removed (use of SIM-card with PIN-code can be allowed

subject to entering the PIN-code to the device settings).

To install the SIM-card disconnect the power socket from the

device, remove the side cover and install the SIM-card into the slot (see
Figure 2).

Figure 2 – Installation of SIM-card into the device.

Connectors for power supply and peripherals

The rear panel of the tracking device contains sockets for

connecting cables. Connecting cables in turn have outlets for power,

Summary of Contents for BI-530C TREK




























































Search results

Summary of Contents for BI-530C TREK

Reviews:

Related manuals for BI-530C TREK

Brands by name

Popular brands

BITREK BI-530C TREK, Operating Manual

Search results

Summary of Contents for BI-530C TREK

Reviews:

Related manuals for BI-530C TREK

Brands by name

Popular brands