15
www.bitrek.eu
[email protected]
+372 880 78 78
Basic configuration
After installing the SIM-card of the mobile operator and connection
of the power supply, the device shall be configured to transmit data to
the server.
All adjustable parameters of the device are divided into groups:
Server and GPRS.
Tracking.
Security.
Service.
Voice communication.
Roaming.
Setting required for basic operation of the device include data
transmission and tracking. They are grouped in “Server and GPRS” and
“Tracking”. After setting up the necessary parameters the device will
transmit data about its current location to the server.
All parameters available for configuration are specified in
Security settings
To meet the safety conditions, access to the configuration of the
device can be limited.
At connection your device to the PC using USB-UART converter,
every time you send a command, the device requires the access
password. Standard access code is 11111. Lifetime of password is 60
seconds. After this timeout the password shall be re-entered. Access
password can be changed by the user (ID 0910, see
Appendix 1).
Format of sending a standard password to the device is
TPASS:
11111;
Examples of response:
«TASK COM TERM: PASSWORD OK»
– correct password is entered;
«TASK COM TERM: INCORRECT PASSWORD»
– incorrect password is
entered;
When sending commands via SMS, set the login and password of
SMS access. To set the login use ID 0252 parameter, to set the password
use ID 0253.
To set the login and password, any SMS command shall have the
following structure to be sent:
<Login><Password><Command1>;<Command2>;<Command3>;
Example of the command to be sent:
abcd 1234 getgps; getstatus;
In addition to the login and password, use the authorized phone
numbers. To record the telephone numbers in the memory device use the
parameters ID 0261 – ID 0269 (
Appendix 1
). Total up to 9 phone
numbers can be applied. When using this function, the device will
