Connectors and Controls
Figure 1 shows the connectors and controls at the front side of the instrument.
1-5
Modules 1 through 5 (page 10)
6
Display (page 11)
7
LAN reset (page 15)
8
Main power switch and indicator LED (page 11)
Figure 2 shows the connectors and controls at the rear side of the instrument.
9
Power inlet with fuse box (page 11)
10, 11
Ethernet connectors 1 and 2 for remote control (page 15) and firmware updates (page 20)
12
USB connector for system upgrades (page 21), and for the master-side of a master/slave
setup (page 13)
13
USB connector for remote control (page 19), and for the slave-side of a master/slave
setup (page 13)
14
Kensington lock attachment
12
BitifEye Digital Test Solutions GmbH
Figure 1: Connectors and Controls on Front Side
Figure 2: Connectors and Controls on Rear Side
