BIT ELD Adapter Speci
f
ications and Requirements
FCC – United States Federal Communications Commission
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful
interference, and
2.
This device must accept any interference
received, including interference that may
cause undesirable
operation.
Any Changes or modi
f
ications not expressly
approved could void the user's authority to operate the equipment.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This
Equipment must be exclusively utilized in
a transportation vehicle.
Contains transmitter module FCC ID: QOQBGM111
IC – Industry Canada
This radio transmitter has been approved by Industry Canada to operate with the embedded chip antenna.
Other antenna types are strictly prohibited for use with this device.
This device complies with Industry Canada's license-exempt RSS standards. Operation is subject to the
following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference,
including interference that may cause
undesired operation of the
device.
Exception from routine SAR evaluation limits are given in RSS-102 Issue 5.
Contains transmitter module IC: 5123A-BGM111
Cet émetteur radio (IC : 5123A-BGM111) a reçu l'approbation d'Industrie Canada pour une exploitation avec
l'antenne puce incorporée. Il est strictement interdit d'utiliser d'autres types d'antenne avec cet appareil.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes
:
SAE – Society of Automotive Engineers
Blue Ink Tech is registered with the Society of Automotive Engineers and has been assigned manufacturer
code 738 for identifying its
devices communicating on a vehicle’s
diagnostic bus.
Blue Ink Tech’s 9-pin BIT ELD adapter
conforms to J1939/16: it autodetects the
communication speed of the
vehicle’s diagnostic port and configures itself automatically. It works with Type I and Type II vehicles that
communicate at 250 kbaud or 500 kbaud. The 9-pin adapters support the J1939 communication protocol.
Blue Ink Tech’s ELD adapters support the J1708 and J1587 standards.
Bluetooth
Blue Ink Tech’s ELD adapters are Bluetooth qualified with declaration ID D030732.
1.
L’appareil ne doit pas produire de
brouillage; et
2.
L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible de
provoquer un
fonctionnement non désiré de l’appareil.
Les limites applicables à l'exemption de l'évauation courante du DAS sont énoncées dans le CNR 102, 5e édition.
Contient le module émetteur IC: 5123A-BGM111
23