8
www.BISSELL.com.au
3
4
1
2
• Max Clean Mode is intended for your dirtiest carpeted areas. Please note that your
carpets will need an estimated 8 hours to dry. To expedite the drying process, place
a fan in the room or near the carpet.
• In Express Clean Mode, the Dirty Water Tank will not get as full as when cleaning
with Deep or Max Clean Mode.
• It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple
times throughout your cleaning process. Room size and the speed at which you clean
are both factors that affect how often the tank may need to be refilled and/or emptied.
Cleaning Your Carpet
Plug into a properly
earthed outlet.
NOTICE:
To prevent
damage to Berber carpets,
avoid repeated strokes in
the same area.
NOTICE:
To ensure compatibility with your carpet, carpet dyes, upholstery, and upholstery
dyes always test your cleaner first in an inconspicuous area for colourfastness.
Max Clean
- Provides an
intensive cleaning for your
dirtiest carpets. After cleaning,
it’s estimated the carpets will
need 8 hours to dry.
Deep Clean
- Delivers a deep clean to your carpet.
Express Clean
- Provides a lighter clean with about a
30-minute dry time.
Recommended Cleaning Pace:
30.5cm/s.
Select cleaning mode:
Press the
Power Switch
to turn the
machine ON.
To recline your
machine for use,
press the Recline
Pedal with your foot.
Max Clean &
Deep Clean Modes:
1.
Press the Spray Trigger
to apply solution while
making
2 slow wet passes
-
1 forward and 1 back.
2.
Release the trigger.
3.
Make
2 slow dry passes
-
1 forward and 1 back, to suck
up the dirty solution.
(Do
not hold down the trigger
for this step.)
Antibacterial
Cleaning (Deep Clean
Mode Only)
1.
Press the Spray Trigger
to apply solution while
making
3 slow wet passes
- 1 forward, 1 back, and 1
forward again.
2.
Release the trigger.
3.
Make
1 slow dry pass
back, to suck up the dirty
solution.
(Do not hold down
the trigger for this step.)
Express Clean Mode:
1.
Press the Spray Trigger to
apply solution while making
2 wet passes
- 1 forward
and 1 back.
2.
Release the trigger.
3.
Make
2 dry passes
-
1 forward, 1 back to suck
up the dirty solution.
(Do not hold down the
trigger for this step.)
Recommended Cleaning
Pace: 30.5cm/s per second
