12
www.BISSELL.com.au
2
1
Maintaining the Brush Roll & Nozzle
Turn OFF and unplug
the machine from the
grounded outlet.
Remove the nozzle
from the foot:
scoop and grip the
Accessory Hose
Door. Pull up to
remove the nozzle.
NOTE:
Be sure to clean the Brush Rolls and nozzle before storing your machine. Follow
these steps if your nozzle becomes clogged with hair or debris.
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and
disconnect plug from electrical outlet before performing maintenance or troubleshooting.
3
4
Rinse the nozzle
and Brush Roll
cover under
running water. Use
the Nozzle Clean
Out Tool to unclog
hair or debris from
the nozzle.
Next, remove the
next layer, the
Brush Roll cover,
to reveal the
Brush Rolls. Press
on the two release
buttons and lift
straight up.
5
6
NOTICE:
To reduce the risk of a leaking condition, do not store unit where freezing may
occur. Damage to internal components may result.
Return the Brush Roll cover by pushing it straight down.
You will hear a “click” from each push button when the
cover is pushed down into place. Line up the nozzle from
the edge near the floor and rotate to snap back into place.
Use the comb to brush
out debris or hair from the
Brush Rolls.
click
