background image

Keep openings free of dust, lint, hair, etc.

Use only com m ercially available floor cleaners

and waxes intended for m achine application

Keep appliance on a level surface

Turn off all controls before unplugging

Unplug by grasping the plug, not the cord

Unplug before attaching the TurboBrush

Be extra careful when cleaning stairs

Pay close attention when working around children

SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.

Commercial use of this unit voids the manufacturer’s

warranty.

GROUNDING INSTRUCTIONS

This appliance m ust be connected to a grounded

wiring system . If it should m alfunction or break

down, grounding provides a safe path of least 

resistance for electrical current, reducing the risk of 

electrical shock. The cord for this appliance has an

equipm ent-grounding conductor and a grounding

plug. It m ust only be plugged into an outlet that is

properly installed and grounded in accordance with

all local codes and ordinances.

WARNING:

Improper connection

of the equipment-grounding conductor can
r esult in a r isk of electr ical shock. Check
with a qualified electrician or service person
if you ar en’t sur e if the outlet is pr oper ly
gr ounded. DO NOT MODIFY THE PLUG. 
If it will not fit the outlet, have a pr oper
outlet installed by a qualified electr ician.
This appliance is designed for  use on a
nominal 1 2 0 -volt cir cuit, and has a
gr ounding attachment plug that looks like
the plug in the drawing above. Make certain
that the appliance is connected to an 
outlet having the same configur ation as
the plug. No plug adapter  should be used
with this appliance.

WARNING:

When using an electrical

appliance, basic precautions should be
observed, including the following:

Read 

all instructions before using your POWERSTEAMER

®

PROHEAT

PLUS. To reduce the risk of fire, electric

shock, or injury, use indoors only. Do not im m erse.

Use only on surfaces m oistened by cleaning

process. Always connect to a properly grounded

outlet. Unplug from  outlet when not in use and

before conducting m aintenance or troubleshooting. 

Do not leave m achine when it is plugged in

Do not service m achine when it is plugged in

Do not use with dam aged cord or plug

Do not use m achine if it has been dropped, 

dam aged, left outdoors or dropped into water

Do not expose to rain, store indoors 

Do not handle unit with wet hands

Do not pull or carry by cord, use cord as a 

handle, close door on cord, pull cord around

sharp corners or edges, run appliance over

cord, or expose cord to heated surfaces

Do not carry the appliance while in use

Do not unplug by pulling on cord-unplug by

grasping plug

Do not handle plug or appliance with wet hands

Do not put any object into appliance openings,

use with blocked opening, or restrict air flow

Do not expose hair, loose clothing, fingers or

body parts to openings or m oving parts

Do not pick up hot or burning objects

Do not pick up flam m able or com bustible 

materials ( lighter fluid, gasoline, kerosene, etc.)  

or use in the presence of explosive liquids or vapor

Do not use appliance in an enclosed space filled

with vapors given off by oil base paint, paint 

thinner, som e m oth proofing substances, 

flammable dust, or other explosive or toxic vapors

Do not pick up toxic m aterial ( chlorine bleach, 

am m onia, drain cleaner, gasoline, etc.)

Do not m odify the 3-prong grounded plug

Do not allow to be used as a toy

Do not use for any purpose other than described

in this User’s Guide

Use only m anufacturer’s recom m ended 

attachm ents

Use only cleaning products form ulated by 

BISSELL for use in this appliance

2

IMPORTANT SAFETY INSTRUCTIONS

Grounded

Outlets

Grounding Pin

Summary of Contents for POWERSTEAMER PROHEAT PLUS 16981 Series



















Reviews: