1. Turn Power and Sm artTem p
™
switches OFF.
2. Unplug power cord from the outlet and coil around
m achine cord wrap.
3. Rem ove and rinse tools in clean, running water, dry and
replace in tool caddy.
4. Coil flex hose around storage brackets on tool caddy.
5. Rem ove Tank-in-Tank,
™
dispose of dirty water. See
The
Basic s
section, page 8.
6. Rinse out the Tank-in-Tank
™
and replace on the m achine.
7. Clean out the Flow Indicator Filter each tim e it is used to
insure best cleaning perform ance. Unscrew the Flow
Indicator Cap, lift out the red Rotor and white Filter.
Rinse all three parts in tap water. Replace the Filter and
Rotor. Replace the Flow Indicator Cap; turn until snug,
do not over-tighten.
8. To rem ove the Clear Nozzle for cleaning out rem aining
dirt and carpet fibers, unscrew the two screws with a
Phillips screwdriver. Rotate the Clear Nozzle up toward
the handle and lift out. Wipe m achine base with a clean
dam p cloth. Rinse nozzle in tap water and replace. Catch
the two tabs in the notches at the top, then rotate down
and replace the screws.
9. Wipe all exterior surfaces with a soft cloth.
10. Store cleaner upright in a protected, dry area.
14
Maintenance/Putting it away
CAUTION:
POWERSTEAMER
®
PROHEAT
™
PLUS uses water and must
not be stor ed wher e ther e
is a danger of fr eezing.
Fr eezing will damage
inter nal components and
void the war r anty.
Cap
Rotor
Filter
Tip:
SmartMix®
Bottle may be
stored with
c onc entrate
ready for
your next
c leaning job.
