13
Mac hine Preparation
1 2. Set up machine following instructions in
The Basics
section, pages 5-9. Be sure to thoroughly rinse out any
rem aining Fiber Cleansing Form ula
™
to prevent slippery
linoleum , vinyl, and tile floors.
Use BISSELL Floor
Cleansing For mula
™
in the Smar tMix
®
tank.
1 3. Check ReadyTools
™
switch - it should be set on
Floor Cleaning.
1 4. Choose the Sm artMix
®
setting to m atch the cleaning job.
1 5. Plug into a proper outlet and turn Power Switch ON.
Turn Sm artTem p
™
switch to ON. The Sm artTem p
™
Ready Light illum inates when POWERSTEAMER
®
PROHEAT
™
PLUS is ready to clean.
Bare Floor Cleaning Tec hnique
1 7. Slowly m ove the m achine nozzle with Bare Floor Tool
forward and back over soiled surface one tim e while
pressing the trigger.
Cau tion : Do n ot over wet.
1 8. Repeat the m otion without pressing the trigger using the
Bare Floor Tool to squeegee and suction up the dirty water.
1 9. Repeat steps 1 and 2 backing along the exit path.
20. Allow about 30 m inutes for the floor to dry com pletely.
21. When the cleaning job is com plete refer to the
Maintenanc e/Putting it Away
section, page 14, for
m achine cleanup and storage instructions.
22. To rem ove Bare Floor Tool gently bend long tab ( right
side) outward and pull tool down away from nozzle.
Rinse thoroughly, dry and store.
Keep plenty of genuine BISSELL
Fiber Cleansing For mula
™
on
hand so you can clean whenever
it fits your schedule. Always use
genuine BISSELL deep cleaning
for mulas. Non-BISSELL cleaning
solutions may har m the machine
and void the war r anty.
