16
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
6
O
peration
Power Switch
The power switch is located on the left side
of the vacuum. Push the rocker switch
“ON” (1) to vacuum, and “OFF” (0) when
cleaning is complete.
.
Handle Positions
Press the handle release pedal, located on
the lower left side of the vacuum, with your
foot to place your vacuum into one of three
cleaning positions.
1.
Upright –
for storage and above floor clean-
ing with tools.
2.
Normal Cleaning –
press handle release
pedal once. Position used for most house-
hold floor cleaning tasks.
3.
Low Cleaning –
with the vacuum in normal
cleaning position, press handle release pedal
again. Use for reaching under low furniture
such as tables, chairs, and/or beds.
Pet Hair Lifter
Use to pick up pet hair from carpeted
surfaces. Just vacuum like you normally
would. The vacuum will grab pet hair when
you pull back and it will release hair and
suction it up when you push forward.
Transporting cleaner
To move your cleaner from room to room, put
the handle in the upright position, tilt the cleaner
back on its rear wheels and push forward.
The cleaner can also be moved by using the
carry handle.
1
2
Pet Hair Lifter
CAUTION:
Before using your vacuum,
make sure that the dirt con-
tainer is in locked position and
that all filters (inner circular,
outer circular, pre-motor and
post-motor) are in place. Do
not operate your vacuum with-
out these filters.
