www.BISSELL.com
5
Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
Snap lower cord wrap to the lower back
of unit. Wrap the vacuum cord.
Place crevice tool (inside extension
wand) and extension wand onto the
lower cord wrap base.
Insert upper handle into vacuum base.
Attach with the screw that is taped to
the handle.
Push handle end into the base of
vacuum on the opposite side.
1
2
3
4
5
6
Slide TurboEraser
®
Tool Holder into place
on the front of the vacuum where the
handle meets the vacuum base. Place
TurboEraser
®
Tool into tool holder.
To install the optional Febreze™ Filter,
press the tank release button and pull
container from vacuum. Twist top of the
tank right to unlock and remove.
5
Remove the pre-motor filter and replace
with the Febreze™ Filter. Place top back
on tank, line arrow with the unlock
graphic and twist left to lock in place.
