www.BISSELL.com
8
With vacuum
unplugged, press
the Tank Release
Button and pull
the dirt container
away from vacuum.
Twist top right to
separate the tank.
Replace the post-motor filter by first
inserting ribs on the left side of the filter
into the left side of the filter housing
then snapping the right side into place.
Replace the filter cover door.
Remove pre-motor filters and check for
dirt on BOTH sides. Separator Screen
can be rinsed and dried as well.
When reassembling, place top tank
piece last lining up the top tank unlock
graphic with lower tank arrow and twist
left to lock into place.
WARNING
Do not operate vacuum with damp or wet filters, as well as without filters or the Dirt
Container in place. Allow components to dry before reassembling the Dirt Container.
Cleaning the Filters
1
2
4
5
6
With dirt container removed, press red
release button to access post-motor
filter. Tap the post-motor filter against
the side of the trash can to shake out
dirt (do not wash filter).
Clean pre-motor
foam filter with mild
detergent. When
completely dry, return
to top of dirt container.
Thin fiber filter should
be on top with black
tab side facing up.
3
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com
and enter
your model number in the search field.
