background image

2

Thanks For Buying A BISSELL CleanView

®

 II

We’re glad you purchased a BISSELL CleanView II Vacuum. Everything we 
know about floor care went into the design and construction of this complete, 
high-tech home vacuuming system.

Your BISSELL CleanView II is well made, and we back it with a limited 
comprehensive one-year warranty. We also stand behind it with a 
knowledgeable, dedicated Consumer Services Department, so, should you ever 
have a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, 
BISSELL is a global leader in the design, manufacture, and service of high 
quality homecare products like your BISSELL CleanView II.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

President and Chief Executive Officer

How To Use This Guide

 

This User’s Guide has been designed to help you 

get the most satisfaction from your BISSELL CleanView 
II. You’ll find assembly and operating instructions, 
safety precautions, as well as maintenance and 
troubleshooting instructions. Please read this Guide 
thoroughly before assembling your vacuum cleaner. 

Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate and 
organize all parts before assembly. Familiarize 
yourself with the parts and where they fit. Following 
this User’s Guide will greatly enhance your ability 
to get the most performance from your BISSELL 
CleanView II for many years.

 WARNING: 

Plastic film can be 
dangerous. To avoid 
danger of suffoca-
tion, keep away from 
babies and children.

ug603-2559_3574-3576_1005.indd   2

ug603-2559_3574-3576_1005.indd   2

1/4/06   9:45:53 AM

1/4/06   9:45:53 AM

Summary of Contents for 20Q9

















Reviews: