background image

Warranty

16

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to 
state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, 
please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.

Limited One Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare 
Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of 
charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.

See information below on "If your BISSELL product should require service".

This warranty applies to product used for personal, and not commercial or rental service. This warranty does not 
apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused 
by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is 
not covered

If your BISSELL product should require service:

Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area. 

If you need information about repairs or replacement parts, or if you have questions about your 
warranty, contact BISSELL Consumer Services.

Website or E-mail:

www.bissell.com
Use the “Customer Services” tab

.

Or Call:

BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET 

Or write:

BISSELL Homecare Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services

BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY 
NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE 
PURCHASE PRICE OF THE PRODUCT.

 

Some states do not allow the exclusion or limitation of incidental or consequential damages, so 
the above limitation or 
exclusion may not apply to you. 

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER 
ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION 
OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION 
FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty lasts, 
so the above limitation may not apply to you.

©2005 BISSELL Homecare Inc
Grand Rapids, Michigan
All rights reserved. Printed in Korea
Part Number 603-2559
Rev 10/05 
Visit our website at:
www.bissell.com

ug603-2559_3574-3576_1005.indd   16

ug603-2559_3574-3576_1005.indd   16

1/4/06   9:46:01 AM

1/4/06   9:46:01 AM

Summary of Contents for 20Q9

















Reviews: