background image

www.BISSELL.com

7

Always use genuine BISSELL deep cleaning formulas. Non-BISSELL 

cleaning solutions may harm the machine and may void the guarantee.

NOTE: 

Fill with hot (140°F/60°C MAX) tap water and add the appropriate  

BISSELL solution. 

DO NOT USE BOILING WATER.  DO NOT HEAT WATER OR 

TANK IN MICROWAVE. 

Do not substitute BISSELL Cleaning Formula with other 

household cleaning products.

Unscrew the cap from the clean water tank. Add hot 

tap water to the water fill line. Next, reference the chart 

below for formula amounts to add to the tank. Twist 

cap back into place.

4

3

1

Lift the clean water tank 

straight up to remove from 

the machine.

The clean water tank is at the 

top of the machine.

Clean Water Tank 

(3.7 Litre)

Dirty Water Tank

2

At the bottom of the upper 

handle, align the clean water 

tank with the grooves and 

slide the tank into place.

FORMULA FILLING  

INSTRUCTIONS

DEEP CLEAN MODE

EXPRESS CLEAN MODE

BISSELL 2X  

Concentrated Formulas

Fill water to the Water  

Fill Line, then add 74 mL  

of formula.

Fill water to the Water  

Fill Line, then add 37 mL 

of formula.

Filling Your Clean Water Tank:

2X Concentrated Formula

NOTICE: 

Do not over wet carpet. Be careful not to run over loose objects or 

edges of area rugs. Stalling the brush may result in premature belt failure.

Summary of Contents for 2066 Series





















Reviews: