www.BISSELL.com
10
Cleaning with Hose & Tool
Insert the hose and
snap into place.
Be sure the colored
hose release clip
is facing out, away
from machine.
Press the spray trigger button to spray
the soiled area, then slowly move tool back
and forth over the area.
Release the trigger to suck up the dirty
solution. Work in small sections until the area
is clean.
When finished cleaning, turn the machine on
to suction up warm clean water to rinse the
inside of the hose and tool. Detach the hose
and tool and close the accessory hose door.
Let the hose and tool air dry before storing.
Attach the tool to the end of the hose.
(Tools may vary by model.) Press the
power button to turn machine on.
NOTE:
If using the
Deep Reach Tool
(select models only) or
Pet Stain Tool
(select models only) be sure the needles of the tool are pressed down into the
carpet so the spray gets into the carpet fibers.
—
Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
Brushroll continues to rotate when in the upright
position.
—
Brushroll continues to turn while product is
turned on and handle is in upright position. To avoid
damage to carpet, rugs, furniture and flooring, avoid
tipping cleaner or setting it on furniture, fringed
area rugs, or carpeted stairs during tool use.
—
The brushroll remains on while cleaning with the
hose and tool. Do not allow cleaner to sit in one
location for an extended period of time, as damage
to floor can result.
Lift the accessory
hose door on top
of foot on the front
of the machine. The
door flips toward the
machine to open.
1
2
3
4
