www.BISSELL.com
15
Brush Roll & Nozzle Care
Turn off and unplug
the machine from the
grounded outlet.
Remove the nozzle
from the foot:
scoop and grip the
Accessory Hose
Door. Pull up to
remove the nozzle.
At this point, the
nozzle and brush
roll cover can
be rinsed under
running water and
the nozzle clean
out tool can be
inserted to unclog
hair or debris.
To reveal the
brush rolls.
Press on the
two release
buttons and lift
straight up.
NOTE:
Be sure to clean the brush rolls and nozzle before storing your machine.
Follow these steps if your nozzle becomes clogged with hair or debris.
1
2
3
4
When finished, return the brush roll
cover by pushing it straight down.
You will hear a click from each “push”
button when the cover is pushed down
into place. Ensure the nozzle wire on
the front of the brush roll cover has
also snapped back into place. Line up
the nozzle from the edge near the floor
and rotate to snap back into place.
Use the comb
to brush out the
debris or hair from
the brush rolls.
click
5
6
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
7
Pull forward the
nozzle wire on
the front of the
brush roll cover
for release.
