Bison 375911150100, Instruction Manual

Page: 32 / 88

10
4.4.2. Attaching the interchangeable dividing plate 7 (Fig. 14; Fig. 15)
a) Slide interchangeable dividing plate 7 onto coupling wheel 3,
b) Position dividing plate 7 against coupling wheel 3 to match mounting holes of plate 7
and wheel 3,
c) Insert all the way special bolt 33 into counter-bored hole in coupling wheel 3 and
positioning hole in dividing plate 7,
d) Screw the plate 7 and wheel 3 with three bolts 38 and spring washers 39,
e) Unscrew special screw 19 and move down click pin 17 with roller pin 16 and roller 15,
f) Position assembled driving - dividing unit against sleeve 2 to match mounting holes of
unit and sleeve 2 and special bolt 33 matched positioning hole in sleeve 2,
g) Evenly screw driving – dividing unit to sleeve 2 by means of special bolt 33 and three
bolts 30 with spring washers 31,
h) Screw special screw 19 (loosen slightly this screw when indexing comes with
difficulties).