INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Bisolid GP xx_B hc> . OM-BSGPHCV02/07/2017/EN
7
1.4. PELLET BURNER DESCRIPTION
The pellet burner series Bisolid GP xx_B hc> is with steel made construction and is designed
on the principle of feeding the wood pellets through a transport auger, then through flexible
pipe over the burner’s combustion chamber fire-grate, where the process of burning of the fuel
and the oxidizer (air for firing) is achieved.
The burner operation is automatic, including: initial loading dose of fuel, ignition, run,
combustion, parameters monitoring of the combustion process, controlled stops at the water
temperature reaching and (or) signal from the room thermostat, final blow. In the optimization
mode, at the operation with the room thermostat is carried optimized modulation based on the
thermal characteristics of the site.
The pellet burner is equipped with display panel which shows information for the burner’s
current operation parameters and/or for adjustment of its operating parameters.
The current manual for operation, installation and maintenance uses notation
Bisolid GP xx_B hc> includes the model of pellet burner modification GP
20_B18 hc>, GP 25_B hc> and GP 32_B hc>.
The main components of wood pellet burner series Bisolid GP xx_B hc> are presented in
Figure 1.
Figure 1. Main components of the pellet burner
1. Cleaning device
2. Main module cover panel
3. Front panel – intuitive LCD display
4. Main control board
5. Fresh air fan
6. Main module housing
7. Plug for feeding and control of transport
auger
8. Air box
9. Photosensor
