E
n
g
li
s
h
Pyro start
plus+
Bischoff & Bischoff GmbH • 27.08.2012
15
7.2.3 Fitting the legrests
• Hold the upper part of the legrest so that it points out-
wards. Activate the handle and now push the legrest
with the guide profile into the hole in the frame (Fig. 9).
• The legrest is now simply folded forward which locks it
automatically into place.
Check the legrests are firmly attached before set-
ting off!
7.2.4 Removing the legrests
To transport your wheelchair as compactly as possible, you
can completely remove the legrests, along with the foot
plates (Fig. 10).
• Pull the handle in order to open the locking mechanism.
• Swing the legrest 90° outwards and pull it upwards
(Fig. 10).
7.2.5 Swinging the legrests away
To make it as easy as possible to get into and out of your
B+B folding wheelchair, if necessary you can simply swing
the legrests away either outwards or inwards, without
having to remove them (Fig. 10).
• Pull the handle. This opens the locking mechanism.
• Now you can swing the legrest away, outwards or
inwards.
• If necessary, fold the foot plates upwards first.
Fig. 9
Fig. 10
