14
Fig. 5
Fig. 6
Fig. 7
7.2. Legrests
7.2.1 Legrests with foot plate
Both legrests are supplied with the foot plates fitted. The
foot plates on both legrests can be folded upwards in the
sitting position.
7.2.2 Angle-adjustable foot plates
The angle of the foot plates can be adjusted:
• To do so, unscrew the Allen screw (Fig. 8). Adjust the
foot plate to the required position by rotating the too-
thed ring.
• Tighten the Allen screw (Fig. 8) again.
Fig. 8
Folding
Place your B+B wheelchair next to you. Tip it by pulling the
backrest towards you, until the load is taken off the opposite
drive wheel.
At the same time, pull the seat cushion upwards until the
chair is completely folded (Fig. 6).
To avoid injuries, do not hold the wheelchair by the
armrest while tilting If legrests are fitted, the foot
plates should first be folded up.
