7
TO AVOID SERIOUS PERSONAL INJURY
ALWAYS
Turn Off, Unplug From Power Source and Perform Lockout/Tagout Procedure to This Machine
BEFORE
Servicing.
PROMPTLY REPLACE
Any Worn or Illegible Labels.
NEVER
Bypass, Alter, or Modify This Equipment in Any Way From Its Original Condition.
USE ONLY GENUINE BIRO
Parts and Accessories Properly Installed.
NEVER
Touch This Machine Without Training and Authorization By Your Supervisor.
NEVER
Place Hands Into Machine Input or Output Openings.
MAINTENANCE
ROTATING GRINDING WORM
A. HIGH TORQUE DRIVE SYSTEM
1. Be sure the motor shaft and main drive shaft are parallel.
2. Be sure sprockets are in alignment.
3. Proper HTD belt tension is
3
/
32
” on one side.
Tension should be checked every six (6) months.
The Model 722 is driven by a High Torque Drive system for power transmissions.
“No Lubrication” is required (in fact) be sure no lubricant comes in contact with the sprockets or belt.
To insure a long life to the drive components:
B. BEARINGS
1. The main drive shaft bearings are sealed for life. No need to lubricate.
2. The motor bearings are sealed for life. No need to lubricate.
