BIRD 7027 Series, Operation Manual

Page: 15 / 23

7
Chapter 3 Ethernet Model Pulse Sensor
The Ethernet model Pulse Sensors communicate over Ethernet and receive
power from an AC/DC power supply.
Monitor/Control
The Ethernet sensor is controlled using Standard Commands for Programmable
Instrumentation (SCPI) over Ethernet. Refer to the 7027 Pulse Sensor
Programming manual for details regarding SCPI commands.
Measurement
The 7027 is a multi-level pulse power sensor. It measures the average power of
up to four levels within a pulse period. Each state is defined with begin and end
times. The begin and end times are referenced to the internal reference signal
or may be referenced to an external sync pulse. See
Chapter 4 Theory of
Operation on page 10
for a complete explanation.
Figure 5 Ethernet Model Pulse Power Sensor
!