BP-002 User's Manual
- 6 -
Note: Please refer to the
user’s manual
for the detailed instructions of internet settings.
2.4 Connecting the Power Cord
1. Make sure the printer’s power is turned off. (O mark on the power switch is pressed down)
2. Make sure the voltage of the electrical outlet matches that of the AC adapter.
3. Plug the AC adapter to the printer’s power supply inlet.
4. Plug one end of power cord into the AC adapter, and then plug the other end of power cord into the
grounded electrical outlet.
Note:
1. If the rated voltage doesn’t match the outlet voltage, contact your dealer for
assistance. Do not plug in the power cord.
2. Please use the electrical outlet connecting the ground properly.
3. Please use original AC adapter, or else, our company will not guarantee to keep the
printer in good repair when it is damaged by unauthorized AC adapter.
Figure 2-7 Connecting the AC adapter
Power Supply Inlet
AC Adapter
Power Cord
Figure 2-6 Connecting the Ethernet interface cable
Ethernet Interface Cable
Ethernet Interface
Summary of Contents for BP-002BF
Page 1: ......
Page 29: ...BP 002 User s Manual 24...
