Birch BP-002BF, User Manual

Page: 44 / 54

BP-002 User's Manual
- 39 -
Define the user-define Characters from c1 to c2.
y=3; 32<=c1<=c2<=126;
0<=x<=12; [Character A 12*24], 0<=x<=9; [Character B 8*16];
d=0~255; k=c2-c1+1
≤ 10; that is to say each time define characters could not over 10;
y specifies the number of bytes in the vertical direction, x specifies the number of dots in the horizontal
direction, d specifies the user-define data.
ESC * Select bit-image mode
Format: ASCII: ESC * m n1 n2 d1..dk
Decimal: 27 42 m n1 n2 d1..dk
Hex: 1B 2A m n1 n2 d1..dk
Description:
Select the image mode with m; n1 and n2 specify the number of dots; the image data d1…dk
m=0, 1, 32, 33; n1=0
～
255; n2=0
～
3; d=0
～
255.
k=n1+256×n2 (m=0, 1)
k= (n1+256×n2) × 3 (m=32, 33)
The number of dots in horizontal direction is n1+256×n2.
If the number dots exceed the max dot number in a line (shown as below), the excess data is ignored. M is
used to select dots image mode.
Vertical direction Horizontal direction
M Mode
Number of dots Dot density Dot density Number of dots (max)
0
8-dot single-density
8 68DPI 101DPI 288
1
8-dot double-density
8 68DPI 203DPI 576
32
24-dot single-density
24 203DPI 101DPI 288
33
24-dot double-density
24 203DPI 203DPI 576
ESC - Turn underline mode on/off
Format: ASCII: ESC - n
Decimal: 27 45 n
Hex: 1B 2D n
Description:
n=0, 48 Turn underline mode off.
n=1, 49 one-dot thick underline mode on
n=2, 50 two-dot thick underline mode on
ESC 2 Set default line spacing to 30/203 inch
Format: ASCII: ESC 2
Decimal: 27 50
Hex: 1B 32
Description:
Set the line spacing to 30/203 inch.