Biral A 402 V2, Installation And Operating Instructions Manual

Page: 25 / 96

1. Safety information
1.1 General remarks
These installation and operating instructions contain items
of information of fundamental importance which must be taken
into account during assembly, operation and maintenance.
They should therefore be read without fail before installation
and commissioning by the fitter and also the responsible
specialist staff/operator. They must always be available
for consultation at the plant’s place of deployment.
Not only are the general safety hints included in this «Safety Hints»
section to be observed, but also the special items of safety
information included in the other sections.
1.2 Identification of notices
Information signs mounted directly on the plant, such as,
for example
- rotating direction arrow
- symbols for fluid connections
must be obeyed without fail and be kept in a fully legible state.
1.3 Staff qualification and training
The staff deployed for assembly, operating, maintenance
and inspection tasks must show that they have the appropriate
qualifications for such work. The field of responsibility,
competence and supervision of the staff must be stipulated
exactly by the operator.
1.4 Risks in the event of non-compliance
with the safety information
Non-compliance with the safety information can result in both
danger for persons and also for the plant and the environment.
Non-compliance with the safety information can lead to the loss
of claims for damages of any kind.
This symbol is a warning of dangerous
electric voltage.
«Safety sign according to DIN 4844-W8».
The safety information contained in these
installation and operating instructions,
non-compliance with which can lead
to danger for people, are specially marked
with the general danger symbol
«Safety sign according to DIN 4844-W9».
You will find this symbol in the case of safety
information non-compliance with which
can endanger the machine and its functions.
Warning
english 25