4
•
Do NOT use or operate the unit with a damaged Power Supply or Power Plug.
If the Power Supply or Power Plug Cord is damaged, it must be replaced by
the manufacturer, authorized service agent, dealer, or similarly qualified person
in order to avoid
hazard. Component must be replaced using appropriate cord
or assembly made available by the manufacturer or authorized service agent
or dealer.
•
Do NOT use in a manner that exceeds the rating of the power outlet or
connected equipment. Plugging too many devices into the same outlet may
cause the electrical outlet to overheat and result in a fire.
•
Do NOT use a power supply voltage other than being specified on the product
and the power supply. Use of any other power supply voltage may cause a fire
or electric shock.
•
To prevent accidental shock, we recommend this product always be used on a
GFCI (Ground Fault Circuit Interrupter) outlet.
•
Do NOT plug or unplug the Power Supply or Power Plug if your hands are wet.
Doing so can cause electric shock or injury.
• Do NOT use the product if the power plug is loosely inserted into the electrical
outlet. A loosely inserted power plug may cause a fire, electric shock or short
circuit. Before using, make sure the Power Plug are inserted into the electrical
outlet completely and securely.
• If the blades or surface of the power plug become soiled, wipe them clean
before using. A dirty power plug may cause a fire.
• Keep the product and power cord away from heated or hot surfaces including
space heaters, stoves, and similar electrical appliances.
•
Do NOT put the machine in water or spray water onto it. Otherwise it may
damage the unit or cause electric shock.
•
To safeguard against fire, electric shock and possible injury risks, keep
the power cord, power plug and the product away from water or other liquids.
WARNING
• Stop using the product immediately if you notice any of the following symptoms
indicating abnormality or malfunction:
- The Power Supply or Power Plug Cord is damaged.
- The Power Supply or Power Plug Cord becomes very hot.
- The Body of product is abnormally hot or deformed.
- Smoke is arising from the product or there is burning smell.
- Some part of the product is cracked, loose, or unstable.
