10
Other Important Information
Observe these guidelines to ensure optimal device functions and performances.
1. Select a location for the unit so:
- Mount the system after all water filtration processes.
- Mount the system near but NOT above an electrical outlet.
- It will be in an upright position.
UPRIGHT
POSITION
INVERTED
POSITION
SIDEWAYS
POSITION
- LED lights and cartridge are visible and accessible. Allow sufficient access for
cartridge replacement. Recommended minimum “Vertical Clearance” is 30cm (12”).
- It is highly recommended that a water shut-off valve be installed before and
near the WDS unit.
- Other equipment or objects should not lean on or press against the device.
Water Line
Pre-Filter
Flow
Shut-Off Valve
(recommended)
300mm
2. Do NOT mount the system above any electrical equipment or items that may
be damaged if they get wet.
3. Note the existing waterline piping layout and flow direction when connecting
appropriate size of tubing on the “WATER IN” and “WATER OUT” sides of the unit.
4. For best result, clean and sanitize the connecting waterlines thoroughly before
installing.
