Biotage Selekt, User Manual, Page: 2 / 28

2 Biotage
®
Selekt User Manual | © Biotage 2018
Biotage
®
Selekt
User Manual
CONTENTS
1
System Overview
1 Columns
1 Racks and Vessels
2 Solvent Supply
2 Internal UV Detector
2 Collection and Fractionation Methods
2 Audible Alarm
2 Lighting
3
Prepare the System
3 Inspect the Tubing
3 Mount Column Holders
3 Start Up the System
3 Assign Solvents
4 Prime the Solvent Inlets
5
Set Up a Purification
5 Specify the Gradient
6 Specify the Information Parameters
6 Specify the Column Parameters
7 Specify the Collection Parameters
7 Specify the Rack Parameters
8
Start, Monitor, and Control a Purification
8 Start a Purification
8 Monitor the Purification in Progress
9 Replace and Allocate Racks During the Run
9 Line Flush, Decompression, and Detector Flush
9 Auto Extend
9 Pause, End, or Abort a Purification
9 Edit and Manually Extend a Purification
10
Unload a Purification
10 Flush the Column with Air
10 Purge the Column
10 Unload the Run
10 Flush the System
10 Shut Down the System
11
Results
11 Export a Report to USB
11 Base a New Run on a Previous Run
12
Flushes and Purge
12 Flush
12 Air Flush
12 Purge
13
Data Administration
13 Manage Column Types
13 Manage Solvents
14 Manage User Accounts
15
System Settings
15 System
15 Purification
16
Maintenance
16 Calibrate the Internal UV Detector
16 Clean the Exterior of the System
16 Clean the Flow Cell of the Internal UV Detector
17 Clean or Release Check Valves
18 Leaks
19 Replace the Fuses
19 Replace the Needle
19 Sonicate Solvent Inlet Filters
20
Troubleshooting
20 Fraction Collector-Related Problems
20 Gradient Problems
20 Internal UV Detector-Related Problems
20 Leak Detected
21 Overpressure Detected
21 Pump-Related Problems
22 QR Reader Problems
22 Contact Biotage
®
1-Point Support
™
23
Solvent Specifications
24
General Information
24 Consumables and Accessories
24 Manufacturer
24 Contact Us
Contents