35
CARE AND MAINTENANCE
STANDARDS APPLIED
This product is in accordance with the measures
in directive CE MDD (93/42/CEE). The following
standards apply to the design and/or the manufac-
turing of the products:
EN 1060-3
Non-invasive sphygmomanometers – Part 3: Additional
requirements for the electromechanical blood pressure measuring
system
EN 1060-4
Non-invasive sphygmomanometers – Part 4: Test procedures
that aim to determine the overall system accuracy of automated
non-invasive sphygmomanometers
ISO 14971
Medical Devices – Application of risk management to medical
devices. Classification according to IEC/EN 60601-1 paragraph 5:
• Internally-powered equipment
• IPXO
• Equipment not suitable for use in the presence of an
anaesthetic mixture flammable with air or oxygen or nitrous oxide.
• Continuous operation
1.
Clean the device and wrist cuff carefully with a
slightly damp cloth.
2.
Do not put the device in water. Damage could
occur if water gets into the device.
3.
Do not use gas, powerful detergent, or solvents to
clean the device, including the wrist cuff.
4.
Use a soft dry cloth to clean your blood pressure
monitor.
5.
. Do not store in direct sunlight, dust, or excessive
humidity.
6.
Avoid extreme temperatures.
7.
Do not dismantle the blood pressure monitor or
the cuff.
8.
Remove the batteries if the blood pressure monitor
is not being used for a prolonged period of time.
Notice-Medicaid-tensio-858754-v1-042017-r1.indd 35
18/04/2017 15:24:37
