BioSure PROFESSIONAL EOS7190-P, Owner'S Manual, Page: 9 / 20

You can choose different modes according to the conditions of use and environment.
For safety in use, please hang the product on the wall or place it on a firm and flat table or shelf.
5.PREPARATION BEFORE USE
①
②
Take out the machine from the packing box,
open the door on the left and take out the
cushioning material that fixes the humidification
water tank.
When the product is turned on for the first time after purchase, the product will undergo
a 30-minute preparation process. This is a standard protection procedure.
ATTENTION
※ The final factory inspection of product production will use water for functional confirmation. We will dry it before
transportation, but in some cases, water droplets may remain in the pipeline inside the main device.
④
③
Install the HEPA filter on the right side of the device.
Prepare 200ml-250ml pure water or distilled water.
(TDS <1ppm or EC< 2μS/cm)
Insert the plug of the power adapter into the
power jack.
The label is on the front
and needs to face outwards.
WATER
LOW
ON
REFILL
TANK
REPLACE
FILTER
REPLACE
CELL
SERVICE
STANDBY
24 Hr
12 Hr
2 Hr
HIGH
MID
LOW
BOOST
COMFORT REFILLING
SMART SENSOR
Confirm the front an
back of the HEPA filter,
correctly fit, and fix the
filter.
※ For safety using, please hang the product on the wall or place it on a firm and flat table or shelf. When ozone is generated, the blue operation indicator on
the top of the unit will be lit. This light cannot be turned off manually.
4 .PRODUCT FUNCTIONS AND FEATURES
※ If you enter the room and smell a strong ozone smell after the operation is stopped, please open the windows and
doors for ventilation and leave the room immediately.
Perform low-concentration operations within a safe range to eliminate bacteria.
Ozone controlled within a safe concentration range.
Disinfection and Deodorization after
room personnel are cleared
Disinfection and Deodorization
with people in the room
COMFORT MODE
(Used when person(s) is present)
(Used when no person is present)
Space Sterilization / Deodorization
Humidification
BOOST MODE
Space Sterilization / Deodorization
Humidification
Higher concentration ozone.
Perform high-concentration air and space treatment. When the operation time expires, the ozone
concentration will fall within the safety standard.
Only when there is no one present in the room, and no one will enter, may the Boost mode be
used. Please evaluate for safety and only operate this mode during the time period when the
room is not used.
When the power is turned on for the
first time, the WATER LOW, REFILL TANK,
SMART SENSOR, STANDBY indicators
will light up and the unit enters the
standby state with one beep.
8