BioSure PROFESSIONAL EOS7190-P, Owner'S Manual, Page: 6 / 20

ATTENTION
Do not place it in a place exposed to direct sunlight or abnormally high temperature.
In addition to deteriorating the surface and parts of the equipment, it may also cause fire.
Do not place it in a closed car, under direct sunlight or near heaters such as stoves.
Place the device on a flat and solid surface or on a solid wall.
Do not install the device in an unstable place, such as on a rocking table or inclined plane.
It may fall and cause injury or product failure.
When moving or transporting, do not put the main device on its side.
Do not use chemicals to clean.
Do not wipe the main device with gasoline, paint thinner, alcohol, etc. In addition, please do not use
electrical (electronic contact) cleaners, in addition to damaging to the appearance these
chemicals may also melt the parts.
Do not rinse the main device with water.
If the main unit is dirty, please clean it with a cloth soaked in neutral detergent or water,
and then wipe it with a soft cloth.
Maintenance
Use the correct water source.
This machine does not have a filtering function. Do not use well water or similar untreated
water sources.
Please use pure water or distilled water (TDS <1ppm or EC <2μS/cm) for humidification.
Make sure to use pure water or distilled water (TDS <1ppm or EC <2μS/cm) to generate ozone.
Keep the inside of the humidification water tank clean and add pure water from time to
time.
If you do not use the product for 3 days or longer, please discard the water in the
humidification water tank and empty the humidification water tank.
5