P4M800 Pro-M7 BIOS SETUP
32
Ctrl+F6, Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake,
Any Key.
PS2MS Wakeup f rom S3/ S4/ S5
This item allows you to wake up from S3/ S4/ S5 with PS2 mouse.
The Choices: Disabled
(default), Enabled.
USB Resume f rom S3
This item allows you to enable or disabled USB resume from S3.
The Choices: Disabled
(default), Enabled.
VG A
When set to On, any event occurring at a VGA Port will awaken a system which has
been powered down.
The Choices: Off
(default), On.
LPT & COM
When this option is set to On, any event occurring at a COM (serial)/LPT (printer)
port will awaken a system which has been powered down.
The Choices: LPT/COM
(default), COM, LPT, NONE.
HDD & FDD
When this option is set to On, any event occurring on a hard drive or a floppy drive
will awaken a system which has been powered down.
The Choices: On
(default), Off.
PCI Master
When set to On, you need a LAN add-on card which supports the power function. It
should also support the wake-up on LAN jump.
The Choices: Off
(default), On.
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the system to Full
ON state.
The Choices: Disabled
(default), Enabled.
Modem Ring Resume
This item allows you to disable or enable Modem Ring Resume function.
The Choices: Disabled
(default), Enabled.
RTC Alarm Resume
When “ Enabled”, you can set the date and time at which the RTC (real-time clock)
alarm awakens the system fro m Suspend mode.
The Choices: Disabled
(default), Enabled.
