P4M800 Pro-M7 BIOS SETUP
17
Precharge to Active (Trp)
This item allows you to specify the delay from precharge command to activate
command.
The Choices:
4T
(default)., 2T, 3T, 5T.
Active to Precharge (Tras)
This item allows you to specify the minimum bank active time.
The Choices:
07T
(default), 05T~20T.
Active to CMD (Trcd)
Use this item to specify the delay from the activation of a bank to the time that a
read or write command is accepted.
The Choices:
4T
(default),2T,
3T, 5T.
REF to ACT/REF (Trf c)
The Choices:
21T
(default). 08T~71T.
ACT(0) to ACT(1) (TRRD)
This item allows you to determine the selection for REF to ACT(1) (TRRD)
The Choices: 3T
(default), 2T, 4T, 5T.
Read to Precharge (Trtp)
This item allows you to determine the selection for Read to Precharge (Trtp)
The Choices: 2T
(default),3T.
Write to Read CMD (Twtr)
This item allows you to determine the selection for Write to Read CMD (Twtr)
The Choices: 1T/2T
(default),2T/3T.
Write Recovery Time (Twr)
This item allows you to determine the selection for Write Recovery Time (Twr)
The Choices: 4T
(default), 2T, 3T, 5T.
DRAM Command Rate
This item controls clock cycle that must occur between the last valid write
operation and the next command.
The Choices: 2T Command
(default), 1T Command.
RDSAIT mode
This item allows you to determine the selection for RDSAIT mode
The Choices: Auto
(default), Manual.
RASAIT selection
This item allows you to determine the selection for RDSAIT
The Choices: 03
(default), Min=0000, Max=003F, Key in a HEX number.
