Biostar EDEQ 4000, User Manual

Page: 29 / 50

24
Connecting Modem
3.5
To use your LCD-PC's MODEM, you must first connect a phone line to the RJ-11 Fax/MODEM port.
To connect a phone line to the Fax/MODEM port, follow the instructions listed below:
Test the line first with a telephone to make sure there is a dial tone.
Connect the phone line to the Fax/MODEM port.
Install the Fax/MODEM device driver to activate the Fax/MODEM Module. The Fax/MODEM device
driver is located on the Driver/Utility CD. Please refer to section 4 for the instruction to install
drivers and utilities.
25
3.6
Connecting LAN
You can create a network with your computer and another one, or get on broadband Internet
connection by using the LAN port.
Connect your LCD PC to a network as follows:
The LAN jack is located on the back of your LCD-PC. (See picture below)
Plug an RJ-45 network cable in the LAN jack.
The other end should be connected to a network hub or switch, or to a peer computer.
Chapter 3
3