22
Figure 27.
Figure 28.
Figure 29.
Figure 30.
Figure 31.
6.10. Dispensing Grade I water. After rinsing (see
6.6
) and filling the tank (see
6.7
), remove
the bell cap and place the vessel for purified water. Press the
Dispense
key (fig.
21/4). Unit performs a 5 to 10 s internal rinsing and starts dispensing purified water.
Note.
If the ultrafilter is installed, loosen the degassing valve (fig. 20/1), to
remove the air bubbles.
Press the
Dispense
key again to stop the water dispensing. If the volumetric dis-
pense is set (see
6.9.1
), then dispensing stops after set volume (fig. 21/11, Volumet-
ric).
6.11. Dispensing Grade II water. When the storage tank is filled, place the vessel for clean
water under the tap (fig. 10/5) on the storage tank.
6.12.
Shutdown
. If the recirculation is not scheduled, shut down the unit. Put the unit in
the OFF stage by pressing the
Run
key. Turn the power switch (fig. 9/6) into position
О
(off). Disconnect the mains plug from the socket. Shut off the feedwater access
pipe.
