18
5.9.2. For
Bio
model. Unpack the dispenser ultrafilter (fig. 20/a) and the yellow sealing ring
(fig. 20/b). Screw the filter in the slot below the display so that the ring stays on top
of the thread of the filter (fig. 20/c) in the slot as shown on figure 20/d. Blue bell cap
must cover the dispenser at all times when the water is not being dispensed.
a
b
c
d
Figure 20. Ultrafilter dispenser installation.
5.10. Insert the black operations dongle (fig. 32) into the socket on the rear panel of the
unit (fig. 9/3).
5.11. Insert the power cable into the socket on the rear panel of the unit(fig. 9/5) and posi-
tion it for an unobstructed access to cable and the plug.
