17
5.9.
Installation of dispenser filter.
5.9.1. For
Trace
and
HPLC
models. Unpack the 0.22 μm dispenser filter (fig. 19/a) and the
black sealing ring (fig. 19/b). Screw the filter in the slot below the display so that the
ring stays on top of the thread of the filter (fig. 19/c) in the slot as shown on figure
19/d. White bell cap must cover the dispenser at all times when the water is not being
dispensed.
a
b
c
d
Figure 19. 0.22 μfilter dispenser installation.
