BIOS AP DVPro DVT12T3, User Manual

Page: 20 / 50

BIOS AP Inc.
－
17
－
HOST
RATE = x.xxMB/S
Execute HDD Patrol
Press MODE button after host transfer speed check and LCD will show HDD patrol status.
Manually activate HDD patrol to scan possible error of disk drives.
The default setting is “Auto”. It means the drives automatically scanned when there is no data access.
Sometimes, users might want to scan disks immediately especially when drives are used after long time.
AUTO
HDD PATROL xx%
Users can change patrol mode to
“FORCE HDD PATROL“ or possibly disable this feature by selecting
“NO HDD PATROL”. It is highly recommended to leave this as default to make sure drives patrol on going.
Check Operating Temperature
Keep pressing MODE button users can check temperature of RAID chip (Core)and system temperature
(Cont).
Cont. Temp 39.1
o
C
Core Temp 48.1
o
C
System fan speed
Keep pressing MODE button LCD will display system fan speed.
FAN1 1,920rpm
FAN2 1,875rpm
Check Real-time Disk Transfer Speed
T
o check each drive’s current transfer speed, keep pressing MODE button to browse real-time disk
transfer speed from channel 0
to channel 11. A “0.00MB/S” means there is no activity on the disk.
Channel 0
RATE = x.xxMB/S
Quick Overview of From Panel Button Operation
DVPro series button operations can be summarized as below