BIOS AP DVPro DVT12T3, User Manual

Page: 16 / 50

BIOS AP Inc.
－
13
－
Ps. Strongly recommend users to record parameters before change. You can follow the
method described on
「
Parameter Confirmation
」
section to read its value.
⚫
Disk Size
DISK Size
xxB
Disk size will not be automatically detected and should be manually configured. The size will be applied to
all drives. Actual disk capacities should be larger than this configured size.
A drive size bigger than supported listing will be added in future firmware upgrade. Please check our website
for new firmware.
Parameter Function Memo
Test 1GB Set DISK Size as 1GB (Test only)
1TB, 2TB, 3TB, 4TB,
5TB, 6TB, 7TB, 8TB,
10TB, 12TB
Set Disk Size as the number
● Please do not change the default setting
If actual drive size was smaller than setup value, error such as
「
ONE DOWN
L
」
,
「
SYSTEM DOWN L
」
will occur and buzzer will be fired.
⚫
RAID Mode Setup
RAID MODE
RAID-6
RAID mode selection, supported RAID MODEs are
RAID 6, RAID 5, RAID 0, RAID 10
RAID10 works as a pair of
‘Drive 0, 1’ ‘Drive 2, 3’, ‘Drive 4, 5’ etc.
⚫
DRIVE Mode Setup
DRIVE MODE
12*
The product supports 12 SATA drives. Minimum number of drives depend on RAID level. If you needed
information of RAID mode, minimum drive or compatible drive models, please contact your vendor or us
for support.
⚫
Recovery Rate Setup
CAUTION
M