3
Introduction
The present Operation Manual EX0220.00.00 is
intended for familiarizing
consumers with the technical data for Exhauster H-0220 Smoke Exhauster as well
as with instructions on installation, preparation for work, and technical
maintenance.
Prior to start of work and use of the Smoke Exhauster it is necessary to
follow the operating procedures issued by the manufacturing plants for the supplied
equipment in addition to this Operation Manual.
Works on installation and adjustment can be performed by the owner of the
unit while meeting the requirements of the basic safety rules. The installation work
shall be carried out only when the unit is disconnected from the mains.
Due to continuous enhancement of the structure (construction) of Smoke
Exhausters as well as their manufacturing technology this Operation Manual might
contain some discrepancies in terms of description of the product (unit) and the
unit itself, and such discrepancies do not impact on the unit efficiency,
performance data, and mounting dimensions.
1
Product Description
1.1
Purpose
Exhauster H-0220 Smoke Exhauster is intended for operation on chimney
flues with diameter of 220 mm. The Smoke Exhauster is widely used in heating
systems to ensure uninterrupted and smooth operation of the boiler especially at
start as well as to guarantee proper discharge of flue gases.
Efficient operation of the Smoke Exhauster is achieved owing to the
software of AIR automatic equipment as well as due to use of high-quality
materials and components of world-known and domestic manufacturers.
Basic components of the Smoke Exhauster are shown on Picture 1
