background image

5

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS - READ

ACID SAFETY

PLEASE FOLLOW THESE IMPORTANT ACID SAFETY INSTRUCTIONS.

ALWAYS ADD THE ACID TO WATER ALREADY IN THE DRUM. NEVER ADD WATER TO ACID.

IMPORTANT :

It  is  important  to  follow  basic  safety  precautions 
when installing and using this electrical equipment, 
including the following :

1.  Ensure you read and follow all instructions.

2. 

WARNING

 - ALWAYS USE DILUTED ACID AT A 

RATIO OF NOT LESS THAN 4 PARTS WATER TO 
1 PART ACID.

3. 

WARNING 

-  Do  not  allow  children  to  use  this 

product unless they are closely supervised at all 
times. This is to prevent accidental injury.

4.  Keep all cables and tubes visible and do not bury 

them. Also, position them so that they do not get 
damaged by lawn mowers, hedge trimmers and 
other equipment.

5. 

WARNING 

-  To  prevent  electrical  shock,  acid 

spillage  or  incorrect  dosing,  replace  damaged 
cords or tubes immediately.

6.  Read these instructions and keep the instruction 

manual in a safe place.

CAUTION

 :

Your warranty could become invalid should you fail 
to observe the following :

1.  The pH BOSS must be installed and operated as 

specified.

2.  Damage due to using undiluted or insufficiently 

diluted acid is not covered by warranty. 

3.  Turn  off  the  power  to  the  pH  BOSS  before 

replacing  the  peristaltic  dosing  pump  squeeze 
tube.

4.  The life of the unit will be extended (as with most 

other pool equipment) if it is placed indoors or in 
an enclosed structure. This is recommended as 
sunlight can damage the Liquid Crystal Display on 
the face of the control unit. The LCD is covered 
within the warranty on a pro-rata basis.

5.  Always  power  the  pH  BOSS  from  a  genuine 

Bionizer  power  adaptor.  An  incorrect  adaptor 
could  damage  the  pH  BOSS  and  will void  your 
warranty.

1. 

WARNING 

- always use diluted acid at 1 part acid 

to 4 or more parts water with pH BOSS.

2. 

ALWAYS 

add acid to a larger volume of water. 

NEVER 

add water to acid.

3. 

ALWAYS 

wear safety glasses and gloves.

4. 

ALWAYS 

dilute  acid  in  a  well  ventilated  area, 

preferably outdoors.

5. 

ALWAYS 

have  a  source  of  fresh  water  nearby, 

such as a hose, so you can wash down accidental 
spillages.

6. 

ALWAYS

  ensure  that  the  acid  drum  is  BELOW 

the level of the pH BOSS Tee, to ensure that the 
acid cannot syphon from the drum to the pool.

7.  In case of acid spillage onto clothing, eyes, skin, 

concrete etc, wash down with large amounts of 
fresh  water  immediately.  SEEK  MEDICAL 
ADVICE IF NECESSARY.

1. e.g. Add water to a
    20 Litre acid drum
    to approx 1/2 full.

In case of a larger
drum, add 1 part 
acid to 4 parts 
water to be mixed 
as above

2. Add 4 Litres only of
    Hydrochloric Acid.

3. Top off the drum
     with more water.

1. 

WARNING 

- always use diluted acid at 1 part acid 

to 4 or more parts water with pH BOSS.

2. 

ALWAYS 

add acid to a larger volume of water. 

NEVER 

add water to acid.

3. 

ALWAYS 

wear safety glasses and gloves.

4. 

ALWAYS 

dilute  acid  in  a  well  ventilated  area, 

preferably outdoors.

5. 

ALWAYS 

have  a  source  of  fresh  water  nearby, 

such as a hose, so you can wash down accidental 
spillages.

6. 

ALWAYS

  ensure  that  the  acid  drum  is  BELOW 

the level of the pH BOSS Tee, to ensure that the 
acid cannot syphon from the drum to the pool.

7.  In case of acid spillage onto clothing, eyes, skin, 

concrete etc, wash down with large amounts of 
fresh  water  immediately.  SEEK  MEDICAL 
ADVICE IF NECESSARY.

For pools of 25,000L (6,500 Ga) and under, dilute 8 
parts water to 1 part acid. So add 2 Litres of acid 
for the 20 Litre drum in the example above.

Summary of Contents for PH BOSS

















Reviews: