BIONIZER DISPLAY
Ionizing Output
PUMP OUTPUT
TIME
PROGRAM
The illustration below shows what the information of the various sections of the Bionizer Display represents.
IONIZING OUTPUT
!
When the Ionizing Output is on, the current output setting is displayed here (Page 14).
!
Displays “
” when the Ionizing Time is completed for the day and the Ionizing output is off.
Off
NOTE: The Ionizing Time for each day, and the Pump Times are two separate things, and should not be confused. For
example the Bionizer may only require 1 Hour of Ionizing Time each day, even though there are 4 Hours of Pump Time
in total. In this example, for the first hour of filtration each day the Bionizer will display the Ionizing Output (eg. “
Ions:
60%
Ions:Off
”). For the other three hours of filtration, the Bionizer will display “
” to indicate that it is not Ionizing
during this time.
TIME
!
Displays the current time, in 24 hour clock format. Clock is backed up for up to 2 weeks if power is lost.
PUMP OUTPUT
!
Auto On . . . . . . . . . Unit is in Automatic Timer mode, and the Pool Pump is switched on (page 15).
!
Auto Off . . . . . . . . . Unit is in Automatic Timer mode, and the Pool Pump is switched off (page 15).
NOTE: When the Bionizer is displaying “
” it is not indicating the Bionizer unit is switched
Auto:Off
in any way. It is merely indicating that the Pool Pump is being controlled by the Timer and is simple
switched Off at this time.
!
Manual On . . . . . . . Pool Pump is switched ON, regardless of the Timer Programs. If the power to the unit is switched
off at any time, it will resume this
Manual On
mode when the power is restored. Use this mode
when operating the Bionizer from an external controller or timer system (page 15).
!
Manual Off . . . . . . . Pool Pump is switched OFF, regardless of Timer Programs. If the power to the unit is switched off at
any time, it will resume this
Manual Off
mode when the power is restored. Use this mode when
servicing the pump, pool cleaner, skimmer box etc (page 15).
DO NOT FORGET TO SET THE UNIT
BACK TO AUTO MODE, OR THE POOL PUMP AND IONIZING FUNCTION WILL NOT OPERATE.
!
Boost . . . . . . . . . . . Unit operates the Pool Pump AND Ionizing outputs to boost Copper level. Use this function when
installing the Bionizer, or in times of high rainfall (page 18).
PROGRAM
!
Displays which of the A, B, C or D timer programs is running, when the unit is in
Auto
mode and the Pool Pump is ON.
7
