13
Scan this QR Code with your smartphone
or tablet to go to the Programming video
on the Bionizer web site.
FIRST TIME START-UP PROGRAMMING
The first time you switch your Bionizer on, you will be
able to set the clock and the pool size. This will
automatically choose optimum settings for most pools.
You can still choose to customize settings later, as
needed.
!
First, set the HOURS (the hours will be flashing):
!
Use the
buttons to change the Hours.
éê
!
Press
once to go on to setting the
PROGRAM/SET
MINUTES (the minutes will be flashing):
!
Use the
buttons to change the Minutes.
éê
!
Press
once to go on to the Pool Size /
PROGRAM/SET
Pool Calculator selection menu (“Pool Size” will be
flashing). From this screen, you can select whether to
enter the Pool Size (in litres), or if you would want to use
the Pool Size Calculator :
!
Use the
buttons to change between “
Pool Size
”
éê
and “
Enter Calculator
”, then press
to
PROGRAM / SET
go to the next step.
If you selected Pool Size, the following screen will now
be displayed :
Press the button to start scrolling the pool size values.
é
If your Pool Size falls between two settings, select the
lower setting.
If your Pool Size falls below the minimum setting
allowed for the Bionizer model you have installed, use
the Pool Size Calculator instead.
Press
to save the Pool Size setting.
PROGRAM / SET
If you selected Enter Calculator, the following screen
will now be displayed :
!
Use the
buttons to set the Pool Length, in
éê
metres.
!
Press
to save the setting and go to
PROGRAM / SET
setting the Pool Width :
!
Use the
buttons to set the Pool Width, in metres.
éê
!
Press
to save the setting and move
PROGRAM / SET
to setting the Average Pool Depth :
!
Use the
buttons to set the Average Pool Depth, in
éê
metres. For example, a pool with a 1.7m deep end
and 1.1m shallow end has an average depth of 1.4m.
!
Press
to save the setting. The
PROGRAM / SET
Bionizer will confirm the Pool Size calculation :
Press
to save the calculated Pool
PROGRAM / SET
Size.
Alternatively, use the
buttons to enter a different
éê
value, then press
to save.
PROGRAM / SET
NOTES:
!
If your Pool Size falls between two settings, select the
lower setting.
!
While setting Pool Size, if wish to change to using the
Pool Size Calculator instead of entering the Litres
directly, press the
button until “
Press up key
” is
ê
displayed, then press
. This will go to
PROGRAM / SET
the Pool Size Calculator.
!
The Pool Size setting will automatically set your
Ionizing Time and Ionizing Output settings to default
optimal values for your pool size, over-writing any
custom settings you may have entered previously.
!
The Pool Size setting is used to calculate the correct
Boost setting, so it is important to enter the correct size
of your Pool.
STEP 4 - FIRST TIME START-UP PROGRAMMING
All user-programmed settings are stored in memory indefinitely when power is switched off.
