BIONIME RIGHTEST Max, User Manual

Page: 4 / 34

5 4
Caution Caution
- Before using RIGHTEST Max Blood Glucose Monitoring System to test your blood glucose, please
read all of the info and conduct all of the tests including the quality control test (Refer to page 45).
- Please perform the quality control test regularly to make sure the test results are fine.
- RIGHTEST Max Blood Glucose Meter can only be used with RIGHTEST Max Blood Glucose Test
Strip. Other brands’ test strips should not be used under any circumstances. The use of other
brands’ strips may give inaccurate results.
- RIGHTEST Max Blood Glucose Monitoring System is intended for
in vitro
diagnostic use only. The
testing result is calibrated to plasma equivalent with whole blood from capillary, vein, artery and
neonates. Capillary whole blood can be sampled from the fingertip, palm or forearm.
- Venous, neonatal or arterial blood testing should be performed by healthcare professionals.
- RIGHTEST Max Blood Glucose Monitoring System is NOT intended for diagnosis of diabetes
mellitus.
- If RIGHTEST Meter and Test Strips are exposed to temperature environments out of range for the
meter – below 6°C (43°F) or above 44°C (111°F) – please wait 30 minutes before testing again.
- Follow all environmental protection regulations when disposing of batteries, strips and lancets.
- Avoid contact with dripping or splashing liquids.
- The minimum blood sample size to test using RIGHTEST Max Blood Glucose Monitoring System
0.75 : ( )
µL
- Please follow the recommendations for follow-up care that have been set by the professional
medical staff for critical glucose values in neonates.
- As a matter of good clinical practice, be caution of the interpretation of neonate glucose value
below 50 mg/dL (2.8 mmol/L).
- Once patient is suspected as rare disease (e.g. galactosemia), the glucose result should based
on laboratory test.
Sample Size Example
Blood sample size above 3.0 might contaminate the test strip port and the meter.
µL
Sample below 0.75 will cause Er4. In this case, repeat the test with a new test strip.
µL
0.75
µL
1.0
µL
1.5
µL
2.0
µL
3.0
µL