43
Understanding Test Results and Messages
If your blood glucose result is unusually high or low, or if you question your test results, repeat the
test with a new
test strip.
You can also run a Quality Control Test with RIGHTEST Max Control Solution to check your
RIGHTEST Max Blood Glucose Meter and RIGHTEST Max Blood Glucose Test Strip (Refer to
" Performing a Quality Control Test " on page 48) .
If the test result still remains unusually high or low, contact your healthcare professional rapidly.
If you feel symptoms that are not consistent with your blood glucose test results and you surely
follow all instructions in this manual, contact your healthcare professional rapidly.
Consult your health care provider for right disposal of used test strips and lancets.
View Window Appearance
Make sure your blood sample covers the
whole area of the view window to get an
accurate test result. An insufficient blood
sample will result in an error message
(" Er4 "). If this occurs, repeat the test with a
new test strip.
Insufficient blood sample
Sufficient blood sample
CAUTION
- Check the expiration date printed on the strip vial every time you use a test strip. Do not use
expired test strips.
- Use each test strip rapidly after removing it from the vial.
- Do not reuse test strips.
- If RIGHTEST Meter and Test Strips are exposed to temperature environments out of range
for the meter – below 6°C (43°F) or above 44°C (111°F) – please wait 30 minutes before
testing again.
- Apply the blood sample only on the sample port of the test strip.
- Please don't drip or inject the blood sample directly by syringe to the sample
entry of test strip. Doing this might contaminate the meter or cause damages
and is not recommended.
42
Summary of Contents for RIGHTEST Max
Page 2: ......
